Loading... Please wait...

Dragino OLG02 Dual Channel Lora Outdoor Gateway (915MHz)

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Current Stock:

Product Description

The Dragino OLG02 is an open source dual channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi or Ethernet. The LoRa radios allow users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

The Dragino OLG02 can be used to provide a low cost IoT wireless solution to support 50~300 sensor nodes.

The OLG02 can be easily mounted via the included bracket to a 3.5 cm diameter pole/post or to a wall.

Besides limited LoRaWAN support, the OLG02 has several modes of operation: LoRa Repeater, MQTT, TCP/IP Client or Server.

This gateway is recommended for a private LoRa network not as a public LoRaWAN gateway.



  • 1 x OLG02 Outdoor Gateway
  • 1 x 12VDC power supply
  • 1 x Passive Power Over Ethernet adaptor

Linux (OpenWRT):

  • 400Mhz ar9331 processor
  • 64MB RAM
  • 16MB Flash


  • 2 x Ethernet 10M/100M RJ45
  • WiFi : 802.11 b/g/n
  • Power Input: 12V DC
  • USB 2.0 host connector x 1
  • USB 2.0 host internal interface x 1
  • Passive Power Over Ethernet adaptor
  • 2 x LoRa Interfaces (915MHz - The frequency band for the Americas)

DRAGINO OLG02 User Manual

Configurable via easy to use web interface

For advanced users only:

The OLG02 gateway is based on OPENWRT. The entire system is open source. All the scripts for processing and forwarding packets can be customized.

Find Similar Products by Category

Add to Wish List

Click the button below to add the Dragino OLG02 Dual Channel Lora Outdoor Gateway (915MHz) to your wish list.

You Recently Viewed...