Product Overview
Be able to display measured temperature/humidity and stablish setpoints for controlling environment conditions. Heating/Cooling & Humidify/Dehumidify functions could be set separately.
Supporting Temp and Humidity Calibration.
Applications: Bird incubators, Fridge Units and Greenhouses.
Specifications:
- Power supply: 110-220VAC ± 10%, 50/60Hz
- Measurement temperature range: -20 ° C ~ +80 ° C
- Measuring humidity range: 00%RH～+100%RH
- Accuracy: ±1°C 0.1%RH
- Relay output contact capacity: 10A/240VAC,
- Integrated sensor, line length 1 meter
- Shell material: gray ABS flame retardant plastic shell
User manual: STC-3028
Temperature Control(Buttons marked with number 1)
Heater:
Start->Long press "up" button until the number flashes and adjust your lower setpoint (Default 20°C)
Stop->Long press "down" button until the number flashes and adjust your upper setpoint (Default 30°C)
Cooler:
Start->Long press "up" button until the number flashes and adjust your upper setpoint
Stop->Long press "down" button until the number flashes and adjust your lower setpoint
Humidity Control(Buttons marked with number 2)
Humidifier:
Start->Long press "up" button until the number flashes and adjust your lower setpoint (Default 40%)
Stop->Long press "down" button until the number flashes and adjust your upper setpoint (Default 60%)
Dehumidifier:
Start->Long press "up" button until the number flashes and adjust your upper setpoint
Stop->Long press "down" button until the number flashes and adjust your lower setpoint
