Loading... Please wait...

12VDC Addressable RGB LED strip - 30 LEDs 1m

  • Image 1
  • Image 2
Price:
$14.95
SKU:
LED-CB1752
Current Stock:
5
Quantity:


Product Description

ADVERTENCIA: ESTOS LEDS NO VIENEN LISTOS PARA CONECTAR. FAVOR REVISAR ESTA GUIA ANTES DE CONECTAR:

https://learn.adafruit.com/adafruit-neopixel-uberguide/best-practices

HAY QUE TENER UNA RESISTENCIA ENTRE 300 ohmios y 500 ohmios ENTRE LA LINEA DE DATOS Y EL "DATA IN" DEL STRIP.

HAY QUE TENER UN CAPACITOR DE 1000uF o más grande entre 12V y GND.

These strips have 30 digitally-addressable pixel LEDs per meter and are very affordable, you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component. The strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 10 cm (3 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! You must use a 12V DC power supply to power these strips.

Note that these strips are sold in cut segments of 1m. They may or may not come with connectors. Assume they don't come with a connector.

Specifications:

  • Model: WS2811 RGB
  • Voltage:  12 Vdc
  • 30 LEDs per meter 
  • Dimensions: L: 1000 mm X W: 12 mm X H: 3.8 mm
  • IP67
  • PCB color: Black
  • Individually addressable, 8 Bits.

 


Find Similar Products by Category


Add to Wish List

Click the button below to add the 12VDC Addressable RGB LED strip - 30 LEDs 1m to your wish list.

You Recently Viewed...